For the best price possible, we also offer these nylon shutter pins bagged in quantities of 15,000 each.
And remember, for U.S. customers these pins always ship free !
Nylon shutter pins are utilized when constructing new plantation shutters. They support the louvers in the shutter panel, and allow the louver to rotate. The narrow end of the nylon pin is inserted into the louver. The larger end of the nylon pin is inserted into the stile or frame. A washer is molded into the pin which prevents the louver from rubbing the inside of the shutter stile allowing for smooth operation of the louvers.
The end of the pin that is .240 inches in diameter is inserted into the Stile. A 1/4 inch diameter hole or drill bit is required. The other end of the shutter pin that is .140 inches in diameter is inserted into the Louver. A hole or drill bit that is 5/32 inch or 9/64 inch is required.
Note: If you need to get a louver back into an existing panel you should order the Louver Repair Pin which is spring loaded.