| This paintable plastic hidden tilt rod is sold in 7ft lengths.
Louvers are attached to Hidden Tilt Rod 3 inches on center.
When using a hidden tilt rod system, you will need to fabricate your shutter using hidden tilt rod louver pins on the side that you will be installing your hidden tilt rod. These louver pins provide a wider gap between the end of the louver, and the inside of the stile required by the hidden tilt bar. Standard nylon louver pins can be utilized on the opposite side of louver that does not have the hidden tilt bar attached to it. |
Shopping Cart - 0 item(s)
